Dettagli
This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 280 mA at 7.4 V, allowing
for a holding torque of 650 g-cm (9 oz-in). The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue connect to the other. It can be controlled by a pair of suitable H-bridges (one for each coil), but we recommend using a bipolar stepper motor driver.
Specifications:
-Size: 35 mm square × 26 mm, not including the shaft (NEMA 14)
-Weight: 130 g (4.5 oz)
-Shaft diameter: 5 mm “D”
-Steps per revolution: 200
-Current rating: 280 mA per coil
-Voltage rating: 7.4 V
-Resistance: 26 O per coil
-Holding torque: 650 g-cm (9 oz-in)
-Inductance: 19.2 mH per coil
-Lead length: 30 cm (12?)
-Output shaft supported by two ball bearings
for a holding torque of 650 g-cm (9 oz-in). The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue connect to the other. It can be controlled by a pair of suitable H-bridges (one for each coil), but we recommend using a bipolar stepper motor driver.
Specifications:
-Size: 35 mm square × 26 mm, not including the shaft (NEMA 14)
-Weight: 130 g (4.5 oz)
-Shaft diameter: 5 mm “D”
-Steps per revolution: 200
-Current rating: 280 mA per coil
-Voltage rating: 7.4 V
-Resistance: 26 O per coil
-Holding torque: 650 g-cm (9 oz-in)
-Inductance: 19.2 mH per coil
-Lead length: 30 cm (12?)
-Output shaft supported by two ball bearings
