Dettagli
The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4? to 60? (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module. The sensor ships installed on our compact carrier board, which makes it easy to integrate this great sensor into your project, and is configured for 5V mode.
Dimensions
Size: 1.3? × 0.41? × 0.4?1
Weight: 2.5 g2
General specifications
Maximum range: 150 cm
Minimum range: 10 cm
Sampling rate: 60 Hz3
Minimum operating voltage: 2.7 V
Maximum operating voltage: 5.5 V
Supply current: 33 mA4
Output type: analog voltage
Output voltage differential: 3 V
Notes:
1 Without included optional headers. If the mounting hole is not needed, that part of the board can be cut off to decrease the length by 0.3?.
2 Without included optional headers.
3 Typical; can be as low as 50 Hz.
4 Average; this sensor draws current in large, short bursts.
Dimensions
Size: 1.3? × 0.41? × 0.4?1
Weight: 2.5 g2
General specifications
Maximum range: 150 cm
Minimum range: 10 cm
Sampling rate: 60 Hz3
Minimum operating voltage: 2.7 V
Maximum operating voltage: 5.5 V
Supply current: 33 mA4
Output type: analog voltage
Output voltage differential: 3 V
Notes:
1 Without included optional headers. If the mounting hole is not needed, that part of the board can be cut off to decrease the length by 0.3?.
2 Without included optional headers.
3 Typical; can be as low as 50 Hz.
4 Average; this sensor draws current in large, short bursts.
