Dettagli
Banana PI with Gigabit ethernet port, It can run with Android 4.4 smoothly. The size of Banana PI M2 same as banana pi M1, it can easily run with the game it support 1080P high definition video output, the GPIO compatible with Raspberry Pi B+ and can run the ROM Image
Note: Banana Pi M2 not support sata port, so you need use USB for hardisk
Hardware specification:
CPU: A31SARM Cortex-A7 quad-core 256KB L 1 cache 1MB L2 cache
GPU: PowerVR SGX544mMP2
Memory (SDRAM): 1GB DDR3 (shared with GPU)
Onboard Storage: TF card (Max 64GB) / MMC card slot
Onboard Network: 10/100/1000 Ethernet RJ45, WIFI onboard+
Video Input: A CSI input connector allows for the connection of a disegned camera module
Video Outputs: HDMI, CVBS, LVDS/RGB
Audio Output: 3.5mm Jack and HDMI
Power Source: 5 volt via MicroUSB(DC In Only) and/or MicroUSB (OTG)
USB 2.0 Ports: 4USB PORT
Buttons: Reset&Power button
GPIO(2X20) pin: GPIO,UART,I2C bus SPI bus with two chip selects,
CAN bus, ADC,PWM+3.3v,+5v,ground
LED: Power Key &RJ45
Remote: IR (Optional)
OS: Android and Linux etc. OS
Interface definition:
Product size: 92mmx 60mm
Weight: 48g
working temperature range: -15 +75C
Note: Banana Pi M2 not support sata port, so you need use USB for hardisk
Hardware specification:
CPU: A31SARM Cortex-A7 quad-core 256KB L 1 cache 1MB L2 cache
GPU: PowerVR SGX544mMP2
Memory (SDRAM): 1GB DDR3 (shared with GPU)
Onboard Storage: TF card (Max 64GB) / MMC card slot
Onboard Network: 10/100/1000 Ethernet RJ45, WIFI onboard+
Video Input: A CSI input connector allows for the connection of a disegned camera module
Video Outputs: HDMI, CVBS, LVDS/RGB
Audio Output: 3.5mm Jack and HDMI
Power Source: 5 volt via MicroUSB(DC In Only) and/or MicroUSB (OTG)
USB 2.0 Ports: 4USB PORT
Buttons: Reset&Power button
GPIO(2X20) pin: GPIO,UART,I2C bus SPI bus with two chip selects,
CAN bus, ADC,PWM+3.3v,+5v,ground
LED: Power Key &RJ45
Remote: IR (Optional)
OS: Android and Linux etc. OS
Interface definition:
Product size: 92mmx 60mm
Weight: 48g
working temperature range: -15 +75C